14- to 21-inch bowls.
S3S supplies centrifuges from 14- to 21-inch bowl sizes. Size and unit count follow your flow rate, slurry type, solids percentage, and target output.
Centrifuges
Variable and Fixed Drive Decanter Centrifuges
S3S runs centrifuges from 14- to 21-inch bowls in full-variable and fixed-drive configurations, so there is a unit matched to your flow rate and cut point and a backup ready when one comes off line.
Fleet capability
A centrifuge matched to your job, and a backup behind it.
S3S selects bowl size and drive configuration from your flow rate, slurry type, and target output, then sets the centrifuge protocol to hit it.
Dry solids, reusable water.
Solids pass the paint filter liquids test for landfill disposal. Recovered water is clean enough for discharge or reuse, so the fluid system stays in circulation and both fluid losses and haul volume drop.
Remote IoT monitoring.
IoT-equipped units report performance data in near real time, so crews can see how a machine is running without standing beside it.
Specifications
Full-variable drive control
Variable frequency drive control tunes bowl and conveyor speed to the feed, holding the cut point as conditions change through the job.
- Drive
- Full-variable (VFD)
- Bowl sizes
- 14 to 21 inches
- Control
- Field-adjustable cut point
- Monitoring
- IoT, near real-time
Work with S3S
Talk to an S3S centrifuge expert.
S3S matches a unit to your flow rate, solids profile, and cut point, puts trained operators on it, and keeps a backup available when one comes off line.